Wire LoRa Node

LoRa Street light luminaire controller with connection via wire

Wire LoRa Node is a wireless LoRa Wire street light controller for individual luminaire control, diagnostics and dimming.

The Wire LoRa Node  supports the following luminaire control interfaces: DALI, DALI 2.0, PWM,1-10V, 0-10V. Data exchange between the device and the server is performed via LoRa cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.

The unit is powered from 110/220 V. The power of the luminaire is supported up to 1000 W.

The Wire LoRa Node  is configured directly via the QULON software.

The Wire LoRa Node is designed to be mounted directly on the lighting pole or luminaire. The Wire LoRa Node is IP66 dust and water resistant.  Installing via wire..

    • Ultra compact waterproof IP66 case

      Convenient and quick connection via wire

      Withstand voltage up to 305V

      Works with luminaires up to 1000W

      Embedded daylight sensor

      Embedded triac for load switching on/off

      Motion sensor input for third party sensors

      Input for DALI 2.0 QULON's motion sensors and eco sensors

      Embedded GPS module

      Embedded accelerometer that monitors lighting pole status

      Compatible to QULON Eco monitoring station

      LEDs showing node status

    • Mechanical:

      Housing: solid case
      Material: plastic
      Dimensions, mm: 87(D) x 91,3(69,3)(H)
      Mass: 0.2 kg
      Mounting: luminaire case, pillar, etc

    • Power & Electrical:

      Input Voltage: ~100-240 V, 50/60 Hz
      Input Power (max): 5 W
      Max load Power: 1000 W

    • Environment:

      Operating Temperature: -40...+70°C
      Storage Temperature: -50...+80°C
      Operating Relative Humidity (max): 100%
      IP Rating: IP 66
      Certification: CE compliant, RoHS
      Warranty: 36 Month

    • Interfaces and Protocols:

      Control output interface: DALI, DALI 2.0, PWM,1-10V, 0-10V
      Navigation: GPS
      Radio Channel: LoRa

    • Inputs / Outputs:

      Connectors: wires
      Sensors: embedded daylight sensor,
      Motion sensor input, Accelerometer

    • Configuration / Indication:

      Setup: remote via the QULON
      Indication: LED

    • Package Contents:

      Wire LoRa Node

    Wire LoRa Node, LoRa, load switch, 0-10V/PWM/DALI/DALI 2.0, GPS, accelerometer
    • : QUL-LW-W-LO-A
    • : 5060452240947
    Wire LoRa Node, LoRa, load switch, 0-10V/PWM/DALI/DALI 2.0
    • : QUL-LW-W-LO-B
    • : 5060452240954
    Wire LoRa Node, LoRa, load switch, 0-10V/PWM
    • : QUL-LW-W-LO-C
    • : 5060452240961
    Wire LoRa Node, LoRa, 0-10V/PWM
    • : QUL-LW-W-LO-D
    • : 5060452240978