Smart IoT Solutions for Street Lighting Management

large_img-projects-qulon.png

medium_img-projects-qulon.png

small_img-projects-qulon.png

thumbnail_img-projects-qulon.png

img-projects-qulon.png

Street Lighting

Devices

Cabinet controllers

Luminaire controllers

Solar controller

Gateway

Sensors

Оptional modules

Global Architectural Lighting Control and Management System

large_img-projects-monarq.png

medium_img-projects-monarq.png

small_img-projects-monarq.png

thumbnail_img-projects-monarq.png

img-projects-monarq.png

Architectural

Smart Pole Infrastructure Solutions

large_222.jpg

medium_222.jpg

small_222.jpg

thumbnail_222.jpg

222.jpg

Smart Pole

Hardware

Accessories for Sundrax DMX networking products. Ordered and supplied separately

thumbnail_Accessories.png

Accessories.png

Accessories

Professional Entertainment Lighting control Solutions

large_img-projects-sundrax.png

medium_img-projects-sundrax.png

small_img-projects-sundrax.png

thumbnail_img-projects-sundrax.png

img-projects-sundrax.png

Entertainment

Intelligent Vehicle Detection Solutions

large_durmus-kavcioglu-NuIbSaztf_g-unsplash.jpg

medium_durmus-kavcioglu-NuIbSaztf_g-unsplash.jpg

small_durmus-kavcioglu-NuIbSaztf_g-unsplash.jpg

thumbnail_durmus-kavcioglu-NuIbSaztf_g-unsplash.jpg

durmus-kavcioglu-NuIbSaztf_g-unsplash.jpg

Traffic Manager

Antennas

Connecting сables

Mounting kits

Adapters

Power line filters

Add-ons

Protective housing

Connectors

Wire Simpline Node is a wired PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.Wire Simpline Node is compatible with third-party motion sensors.Wire Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.Wire Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).The device is designed for installation in a luminaire, in a luminaire body or inside a lighting pole via wire. Dust and moisture protection class IP68.

PLC (Power Line Communication) Pole-mounted outdoor street light luminaire controller with connection via wire (Slider)

medium_Wire Simpline Node.webp

small_Wire Simpline Node.webp

thumbnail_Wire Simpline Node.webp

Wire Simpline Node.webp

PLC (Power Line Communication) Pole-mounted outdoor street light luminaire controller with connection via wire

Wire Simpline Node

Wire LiTouch Node is a module for wireless control of luminaires via radio. It is designed for individual control, diagnostics and dimming.Individual control module for LiTouch wireless lighting management system (868/915 MHz) is a device that can be connected to the LiTouch system through a wire. It allows for individual control of the lighting system and is compatible with both 868 and 915 MHz frequency bands. With the LiTouch system, users can easily manage their lighting system wirelessly and without the need for additional wiring. The device is designed for easy installation and can be mounted in various locations.The device supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces as well as individual load control (on/off). The units are equipped with GPS receiver, depending on the version.Wire LiTouch Node is configured and controlled via an 800-950MHz radio channel via LiTouch Base Stations.The device is designed to be installed in a lighting fixture housing using a wire.

LiTouch wireless (868/915 MHz) street light luminaire controller with connection via wire png

medium_Wire LiTouch Node.webp

small_Wire LiTouch Node.webp

thumbnail_Wire LiTouch Node.webp

Wire LiTouch Node.webp

LiTouch wireless (868/915 MHz) street light luminaire controller with connection via wire

large_Wire LiTouch Node.webp

Wire LiTouch Node

NEMA GSM Node is a wireless 2G/4G/NB-IoT street light controller for individual luminaire control, diagnostics and dimming.The NEMA GSM Node supports the following luminaire control interfaces: DALI, DALI 2.0, PWM, 1-10V, 0-10V. Data exchange between the device and the server is performed via 2G/4G/NB-IoT cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.The unit is powered from 110/220 V. The power of the luminaire is supported up to 1000 W.The NEMA GSM Node is configured directly via the QULON software.The NEMA GSM Node is designed to be mounted directly on the luminaire. The luminaire is IP66 dust and water resistant. Installing via NEMA plug.

large_NEMA GSM Node, NEMA LoRa Node.webp

medium_NEMA GSM Node, NEMA LoRa Node.webp

small_NEMA GSM Node, NEMA LoRa Node.webp

thumbnail_NEMA GSM Node, NEMA LoRa Node.webp

NEMA GSM Node, NEMA LoRa Node.webp

Nema iot lumimer controller, announcement view

large_NEMA GSM Node, NEMA LoRa Node-2.webp

medium_NEMA GSM Node, NEMA LoRa Node-2.webp

small_NEMA GSM Node, NEMA LoRa Node-2.webp

thumbnail_NEMA GSM Node, NEMA LoRa Node-2.webp

large_NEMA GSM Node, NEMA LoRa Node, NEMA Simpline Node.webp

medium_NEMA GSM Node, NEMA LoRa Node, NEMA Simpline Node.webp

small_NEMA GSM Node, NEMA LoRa Node, NEMA Simpline Node.webp

thumbnail_NEMA GSM Node, NEMA LoRa Node, NEMA Simpline Node.webp

NEMA GSM Node, NEMA LoRa Node, NEMA Simpline Node.webp

2G/4G/NB-IoT NEMA street light luminaire controller

NEMA GSM Node

NEMA Simpline Node is a module for individual control and diagnostics of luminaires and for dimming.NEMA Simpline Node is a PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.NEMA Simpline Node is compatible with third-party motion sensors.NEMA Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.NEMA Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).The device is designed for installation on a luminaire via NEMA. Dust and moisture protection class IP66.

PLC (Power Line Communication) NEMA street light luminaire controller (Slider)

medium_NEMA Simpline Node.webp

small_NEMA Simpline Node.webp

thumbnail_NEMA Simpline Node.webp

NEMA Simpline Node.webp

PLC (Power Line Communication) NEMA street light luminaire controller, announcement view

large_NEMA Simpline Node-2.webp

medium_NEMA Simpline Node-2.webp

small_NEMA Simpline Node-2.webp

thumbnail_NEMA Simpline Node-2.webp

PLC (Power Line Communication) NEMA street light luminaire controller, side view

large_NEMA Simpline Node-2-2.webp

medium_NEMA Simpline Node-2-2.webp

small_NEMA Simpline Node-2-2.webp

thumbnail_NEMA Simpline Node-2-2.webp

PLC (Power Line Communication) NEMA street light luminaire controller

NEMA Simpline Node

Wire GSM Node is a wireless 2G/4G/NB-IoT Wire street light controller for individual luminaire control, diagnostics and dimming.The Wire GSM Node &nbsp;supports the following luminaire control interfaces: DALI, DALI 2.0, PWM, 1-10V, 0-10V. Data exchange between the device and the server is performed via 2G/4G/NB-IoT cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.The unit is powered from 110/220 V. The power of the luminaire is supported up to 1000 W.The Wire GSM Node is configured directly via the QULON software.The Wire GSM Node is designed to be mounted directly on the lighting pole or luminaire. The Wire GSM Node is IP66 dust and water resistant. &nbsp;Installing via wire..

Street light luminaire controller with connection via wire (Slider)

large_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, QULON Mini, MONARQ Mini.webp

medium_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, QULON Mini, MONARQ Mini.webp

small_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, QULON Mini, MONARQ Mini.webp

thumbnail_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, QULON Mini, MONARQ Mini.webp

Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor, QULON Mini, MONARQ Mini.webp

Street light luminaire controller with connection via wire

large_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor.webp

medium_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor.webp

small_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor.webp

thumbnail_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor.webp

Street light luminaire controller with connection via wire, side view

large_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor-2.webp

medium_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor-2.webp

small_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor-2.webp

thumbnail_Wire GSM Node, Wire LoRa Node, Wire Daylight Sensor-2.webp

2G/4G/NB-IoT Street light luminaire controller with connection via wire

Wire GSM Node

NEMA LiTouch Node is a module for wireless control of luminaires via radio. It is designed for individual control, diagnostics and dimming.Individual control module for LiTouch wireless lighting management system (868/915 MHz) is a device that can be connected to the LiTouch system through a NEMA connector. It allows for individual control of the lighting system and is compatible with both 868 and 915 MHz frequency bands. With the LiTouch system, users can easily manage their lighting system wirelessly and without the need for additional wiring. The device is designed for easy installation and can be mounted in various locations.The device supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces as well as individual load control (on/off). The units are equipped with GPS receiver, depending on the version.NEMA LiTouch Node is configured and controlled via an 800-950MHz radio channel via LiTouch Base Stations.The device is designed to be installed in a lighting fixture housing using a NEMA C136.41 connector.

LiTouch wireless (868/915 MHz) NEMA street light luminaire controller

large_NEMA LiTouch Node.webp

medium_NEMA LiTouch Node.webp

small_NEMA LiTouch Node.webp

thumbnail_NEMA LiTouch Node.webp

NEMA LiTouch Node.webp

LiTouch wireless (868/915 MHz) NEMA street light luminaire controller, announcement view

LiTouch wireless (868/915 MHz) NEMA street light luminaire controller, side View

LiTouch wireless (868/915 MHz) NEMA street light luminaire controller, bottom view

NEMA LiTouch Node

Zhaga LiTouch Node is a module for wireless control of luminaires via radio. It is designed for individual control, diagnostics and dimming.Individual control module for LiTouch wireless lighting management system (868/915 MHz) is a device that can be connected to the LiTouch system through a Zhaga connector. It allows for individual control of the lighting system and is compatible with both 868 and 915 MHz frequency bands. With the LiTouch system, users can easily manage their lighting system wirelessly and without the need for additional wiring. The device is designed for easy installation and can be mounted in various locations.The device supports DALI 2.0 interfaces as well as individual load control (on/off). The units are equipped with GPS receiver, depending on the version.Zhaga LiTouch Node is configured and controlled via an 800-950MHz radio channel via LiTouch Base Stations.The device is designed to be installed in a lighting fixture housing using a Zhaga connector.

LiTouch wireless (868/915 MHz) Zhaga street light luminaire controller (Slider)

large_Zhaga LiTouch Node.webp

medium_Zhaga LiTouch Node.webp

small_Zhaga LiTouch Node.webp

thumbnail_Zhaga LiTouch Node.webp

Zhaga LiTouch Node.webp

LiTouch wireless (868/915 MHz) Zhaga street light luminaire controller, announcement view

LiTouch wireless (868/915 MHz) Zhaga street light luminaire controller, side view

large_Zhaga LiTouch Node-2.webp

medium_Zhaga LiTouch Node-2.webp

small_Zhaga LiTouch Node-2.webp

thumbnail_Zhaga LiTouch Node-2.webp

LiTouch wireless (868/915 MHz) Zhaga street light luminaire controller, bottom view

large_Zhaga LiTouch Node-3.webp

medium_Zhaga LiTouch Node-3.webp

small_Zhaga LiTouch Node-3.webp

thumbnail_Zhaga LiTouch Node-3.webp

LiTouch wireless (868/915 MHz) Zhaga street light luminaire controller

Zhaga LiTouch Node

Screw Simpline Node is a PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.Screw Simpline Node is compatible with third-party motion sensors.Screw Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.Screw Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).The device is designed for installation in a luminaire, in a luminaire body or inside a lighting pole via screw. Dust and moisture protection class IP68.

PLC (Power Line Communication) Embedded street light luminaire controller with connection via screw terminals (Slider)

thumbnail_Screw Simpline Node.webp

Screw Simpline Node.webp

PLC (Power Line Communication) Embedded street light luminaire controller with connection via screw terminals

large_Screw-Simpline-Node-2.webp

medium_Screw-Simpline-Node-2.webp

small_Screw-Simpline-Node-2.webp

thumbnail_Screw-Simpline-Node-2.webp

Screw Simpline Node

Zhaga GSM Node is a wireless 2G/4G/NB-IoT Zhaga street light controller for individual luminaire control, diagnostics and dimming.The Zhaga GSM Node supports the following luminaire control interfaces: DALI 2.0. Data exchange between the device and the server is performed via 2G/4G/NB-IoT cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.The unit is powered from 12-30 V DC.The Zhaga GSM Node is configured directly via the QULON software.The Zhaga GSM Node is designed to be mounted directly on the luminaire. The luminaire is IP66 dust and water resistant. Available with Zhaga connection.

large_Zhaga LoRa Node, Zhaga GSM Node.webp

medium_Zhaga LoRa Node, Zhaga GSM Node.webp

small_Zhaga LoRa Node, Zhaga GSM Node.webp

thumbnail_Zhaga LoRa Node, Zhaga GSM Node.webp

Zhaga LoRa Node, Zhaga GSM Node.webp

large_Zhaga Bottom.webp

medium_Zhaga Bottom.webp

small_Zhaga Bottom.webp

thumbnail_Zhaga Bottom.webp

Zhaga Bottom.webp

large_Zhaga LoRa Node, Zhaga GSM Node-2.webp

medium_Zhaga LoRa Node, Zhaga GSM Node-2.webp

small_Zhaga LoRa Node, Zhaga GSM Node-2.webp

thumbnail_Zhaga LoRa Node, Zhaga GSM Node-2.webp

2G/4G/NB-IoT Zhaga street light luminaire controller

Zhaga GSM Node

Wire LoRa Node is a wireless LoRa Wire street light controller for individual luminaire control, diagnostics and dimming.The Wire LoRa Node &nbsp;supports the following luminaire control interfaces: DALI, DALI 2.0, PWM,1-10V, 0-10V. Data exchange between the device and the server is performed via LoRa cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.The unit is powered from 110/220 V. The power of the luminaire is supported up to 1000 W.The Wire LoRa Node &nbsp;is configured directly via the QULON software.The Wire LoRa Node is designed to be mounted directly on the lighting pole or luminaire. The Wire LoRa Node is IP66 dust and water resistant. &nbsp;Installing via wire..

LoRa Street light luminaire controller with connection via wire

Wire LoRa Node

NEMA LoRa Node is a wireless LoRa street light controller for individual luminaire control, diagnostics and dimming.The NEMA LoRa Node supports the following luminaire control interfaces: DALI, DALI 2.0, PWM, 1-10V, 0-10V. Data exchange between the device and the server is performed via LoRa cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.The unit is powered from 110/220 V. The power of the luminaire is supported up to 1000 W.The NEMA LoRa Node is configured directly via the QULON software.The NEMA LoRa Node is designed to be mounted directly on the luminaire. The luminaire is IP66 dust and water resistant. Installing via NEMA plug.

LoRa NEMA street light luminaire controller

NEMA LoRa Node

Zhaga LoRa Node is a wireless LoRa Zhaga street light controller for individual luminaire control, diagnostics and dimming.TheZhaga LoRa Node supports the following luminaire control interfaces: DALI 2.0. Data exchange between the device and the server is performed via LoRa cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.The unit is powered from 12-30 V DC.The Zhaga LoRa Node is configured directly via the QULON software.The Zhaga LoRa Node is designed to be mounted directly on the lighting pole or luminaire. The luminaire is IP66 dust and water resistant. Available with Zhaga connection.

LoRa Zhaga street light luminaire controller

Zhaga LoRa Node

How to choose a device placement option that suits you: on a pole, on top of a pole, in a cabinet, on a luminaire, inside a luminaire?

Terminal block, NEMA, Zhaga, Wire connectors