The QULON outdoor lighting management system for sports fields and parking areas integrates advanced technologies that provide operators with efficient control and flexible adaptation of the lighting according to the unique needs and conditions of each location, resulting in optimal lighting levels, comfort, and energy savings. We highlight three optimal solutions: Simpline (Power Line) technology, Wireless Litouch, and DALI.
The implementation of Simpline (Power Line) technology in the QULON system allows for the utilization of the building's electrical wiring to transmit lighting control signals. This efficient solution ensures ease of installation and use. Operators can group luminaires and centrally manage them, as well as adjust lighting scenarios and brightness to meet specific requirements.
Wireless Litouch technology in the QULON system offers wireless lighting control through radio signals. Operators can easily manage the lighting via smartphones, tablets, or dedicated control panels, providing high flexibility and mobility. Adjusting brightness, creating lighting scenarios, and monitoring the operation of the lighting becomes simple and convenient tasks.
DALI (Digital Addressable Lighting Interface) technology in the QULON system enables individual addressing of each luminaire in the network. Operators can precisely adjust the lighting, regulate brightness, and dim the lights to achieve optimal atmosphere and energy efficiency. DALI provides excellent control flexibility, allowing for the creation of diverse lighting scenarios and responsiveness to changing needs.
The utilization of these advanced technologies in the QULON outdoor lighting management system for sports fields and parking areas unlocks new possibilities for efficient and intelligent lighting. Operators can fine-tune and control the lighting with high precision, adapt it to different situations, and provide optimal conditions for users.
Energy savings up to 60%
Street lights dim automatically based on schedule or environment, saving up to 60% energy and reducing CO2 emissions
Reduce maintenance costs up to 50%
We reduce service costs up to 50% by proactively alerting maintenance staff of faults/outages in fixtures or networks
Programming tools
Create complex scenarios with QULON devices based on daylight, weather, traffic, air pollution, and holidays - virtually limitless!
Live control
Manage street lights remotely with QULON software. Get live stats, create performance reports with a click for individual or grouped fixtures
Wire LiTouch Node
Wire LiTouch Node is a module for wireless control of luminaires via radio. It is designed for individual control, diagnostics and dimming.
Individual control module for LiTouch wireless lighting management system (868/915 MHz) is a device that can be connected to the LiTouch system through a wire. It allows for individual control of the lighting system and is compatible with both 868 and 915 MHz frequency bands. With the LiTouch system, users can easily manage their lighting system wirelessly and without the need for additional wiring. The device is designed for easy installation and can be mounted in various locations.
The device supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces as well as individual load control (on/off). The units are equipped with GPS receiver, depending on the version.
Wire LiTouch Node is configured and controlled via an 800-950MHz radio channel via LiTouch Base Stations.
The device is designed to be installed in a lighting fixture housing using a wire.
LiTouch Base Station
LiTouch Base Station is a base station for the individual control of LiTouch Nodes equipped luminaires via radio. The unit allows each luminaire to be individually controlled remotely, monitoring its status and energy consumption.
The 868/915 MHz radio channel is used for communication with the luminaires. The base station can serve up to 1000 LiTouch Nodes at distances of up to 5 km, depending on terrain and building density.
Communication with the QULON server is via a 2G/3G/4G mobile network or a wired Ethernet connection.
The unit is configured remotely using the QULON software.
The unit is designed to be mounted on a pole lighting or vertical surface. The unit is IP66 dust and water resistant.
LiTouch Base Station Lite
LiTouch Base Station Lite is a base station for individually controlling luminaires equipped with LiTouch Nodes via radio. The device allows remote individual control of each luminaire, monitoring their status and energy consumption.
The 868/915 MHz radio channel is used for communication with the luminaires. The base station can serve up to 1000 LiTouch Nodes at distances of up to 5km, depending on terrain and building density.
A 2G/4G mobile network is used to communicate with the QULON server.
The unit is configured remotely using the QULON software.
The unit is designed to be mounted on a pole lighting or vertical surface. The unit is IP66 dust and water resistant.
Wire Simpline Node
Wire Simpline Node is a wired PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.
Wire Simpline Node is compatible with third-party motion sensors.
Wire Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).
The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.
Wire Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).
The device is designed for installation in a luminaire, in a luminaire body or inside a lighting pole via wire. Dust and moisture protection class IP68.
QULON Simpline
QULON Simpline is an add-on module for remote control of devices equipped with PLC (Power Line Communication) technology modules.
QULON Simpline uses PLC technology to control luminaires. An RS-485 (MODBUS) interface is used to communicate with the the cabinet controllers.
The unit is powered from 100-250 V.
The unit is configured by the QULON software via the cabinet controllers.
The unit is designed for DIN rail mounting in a power supply cabinet.
NEMA Simpline Node
NEMA Simpline Node is a module for individual control and diagnostics of luminaires and for dimming.
NEMA Simpline Node is a PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.
NEMA Simpline Node is compatible with third-party motion sensors.
NEMA Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).
The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.
NEMA Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).
The device is designed for installation on a luminaire via NEMA. Dust and moisture protection class IP66.
QULON DALI
The QULON DALI is a smart Ethernet/RS-485/DALI converter for street lighting control.
The unit is powered via 100-250 V.
For configuration and data transfer, the device is equipped with an Ethernet port with 10/100 Mbit/s connection speed.
The device is configured via the Web interface, through which the DALI lines and the equipment on them can also be configured.
The QULON DALI is designed to be installed indoors or in outdoor shelters. The unit operates in plus or minus temperatures. It is installed on a DIN rail.
Street Light Controller QULON C1
Street Light Controller QULON C1 is designed for remote diagnostics and control of street lighting systems.
For two-way communication with other devices and meters, Street Light Controller QULON C1 uses RS-485 interfaces. A 2G cellular connection is used to communicate with the QULON server.
The unit is powered from 110/220 V AC or 9-36 V DC.
The Street Light Controller QULON C1 can be configured remotely using the QULON control system and the DIP switches on the unit.
The unit is designed for DIN rail mounting in a lighting control cabinet.
Street Light Controller QULON C2
Street Light Controller QULON C2 is the central controller of the QULON control system. It is designed to provide remote monitoring and control of all electrical equipment in the lighting control cabinet: magnetic starters, QULON system accessories, etc.
Street Light Controller QULON C2 uses RS-485 or CAN interfaces for two-way communication with other devices and meters. A 2G/3G/4G cellular or 10/100 Base TX Ethernet wired connection is used to communicate with the QULON server. The unit is equipped with a GPS module for time synchronization and geo-positioning.
The unit is powered from 110/220 V AC or 9-36 VDC.
Street Light Controller QULON C2 is remotely configurable using the QULON control system and the DIP switches on the unit.
The unit is designed for DIN rail mounting in a lighting control cabinet.
