A project was implemented in El Matorral, Fuerteventura, using a central controller in a cabinet, a controller in a support structure with Powerline SimpLine technology, and a PLC modem in the cabinet.
The goal of the project was to create an innovative lighting control system in the El Matorral area that ensures efficiency and energy savings. The central controller, housed in the cabinet, plays a key role in managing the entire lighting system.
The controller in the support structure with Powerline SimpLine technology provides a convenient means of controlling the lighting fixtures, allowing for the installation and configuration of various lighting parameters. Powerline SimpLine technology utilizes power lines for data transmission, simplifying installation and ensuring a reliable connection between the controller and the lighting fixtures.
The PLC modem, located in the cabinet, facilitates communication between the central controller and the controller in the support structure, enabling the transmission of data and commands between them. This allows for the centralized and flexible control of the lighting in El Matorral from the central cabinet.
Wire Simpline Node
Wire Simpline Node is a wired PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.
Wire Simpline Node is compatible with third-party motion sensors.
Wire Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).
The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.
Wire Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).
The device is designed for installation in a luminaire, in a luminaire body or inside a lighting pole via wire. Dust and moisture protection class IP68.
QULON Simpline
QULON Simpline is an add-on module for remote control of devices equipped with PLC (Power Line Communication) technology modules.
QULON Simpline uses PLC technology to control luminaires. An RS-485 (MODBUS) interface is used to communicate with the the cabinet controllers.
The unit is powered from 100-250 V.
The unit is configured by the QULON software via the cabinet controllers.
The unit is designed for DIN rail mounting in a power supply cabinet.
Street Light Controller QULON C2
Street Light Controller QULON C2 is the central controller of the QULON control system. It is designed to provide remote monitoring and control of all electrical equipment in the lighting control cabinet: magnetic starters, QULON system accessories, etc.
Street Light Controller QULON C2 uses RS-485 or CAN interfaces for two-way communication with other devices and meters. A 2G/3G/4G cellular or 10/100 Base TX Ethernet wired connection is used to communicate with the QULON server. The unit is equipped with a GPS module for time synchronization and geo-positioning.
The unit is powered from 110/220 V AC or 9-36 VDC.
Street Light Controller QULON C2 is remotely configurable using the QULON control system and the DIP switches on the unit.
The unit is designed for DIN rail mounting in a lighting control cabinet.
