Over 4,500 lights LED and HPS lights in Jakarta are switched and dimmed through powerline control according to special saving scenarios. Careful deployment plan and special filtering algorithm made it possible to combine both controlled and uncontrolled lights within a single power line. Old HPS lamps in the side streets are controlled individually together with dimmable LEDs in central avenues.
A comprehensive lighting control system was implemented in the city center of Jakarta. A total of 4,000 LED lighting poles were equipped with state-of-the-art technology to enable efficient management and control. The project involved the installation of 65 gateways and 3,750 PLC control nodes strategically placed throughout the area.
These gateways and control nodes serve as the foundation of the system, facilitating seamless communication and coordination among the LED lighting fixtures. With this intelligent infrastructure in place, the lighting in Jakarta's city center can be turned on, dimmed, and adjusted according to specific scenarios and energy-saving requirements.
Careful planning and deployment of the control nodes ensured the integration of both controlled and uncontrolled lights within a single power line network. This innovative approach allowed for individual control of older high-pressure sodium lamps in the side streets while simultaneously enabling the dimming capabilities of the LED lights on the central avenues.
As a result of this comprehensive system, Jakarta has achieved enhanced energy efficiency, reduced operational costs, and improved overall lighting quality. The combination of gateways, PLC control nodes, and LED lighting poles has transformed the city center into a well-lit and environmentally conscious urban environment.
Energy savings up to 60%
Street lights dim automatically based on schedule or environment, saving up to 60% energy and reducing CO2 emissions
Reduce maintenance costs up to 50%
We reduce service costs up to 50% by proactively alerting maintenance staff of faults/outages in fixtures or networks
Programming tools
Create complex scenarios with QULON devices based on daylight, weather, traffic, air pollution, and holidays - virtually limitless!
Live control
Manage street lights remotely with QULON software. Get live stats, create performance reports with a click for individual or grouped fixtures
Wire Simpline Node
Wire Simpline Node is a wired PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.
Wire Simpline Node is compatible with third-party motion sensors.
Wire Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).
The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.
Wire Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).
The device is designed for installation in a luminaire, in a luminaire body or inside a lighting pole via wire. Dust and moisture protection class IP68.
QULON Simpline
QULON Simpline is an add-on module for remote control of devices equipped with PLC (Power Line Communication) technology modules.
QULON Simpline uses PLC technology to control luminaires. An RS-485 (MODBUS) interface is used to communicate with the the cabinet controllers.
The unit is powered from 100-250 V.
The unit is configured by the QULON software via the cabinet controllers.
The unit is designed for DIN rail mounting in a power supply cabinet.
Street Light Controller QULON C
The Heart of Smart Street Lighting Control
Street Light Controller QULON C is at the core of our smart street lighting control system, offering precise remote monitoring and management capabilities for all lighting electrical components. Designed for modern urban needs, it facilitates secure two-way communication and integrates effortlessly with smart city infrastructure for enhanced lighting management from anywhere.
Street Light Controller QULON C is the central controller of the QULON control system. It is designed to provide remote monitoring and control of all electrical equipment in the lighting control cabinet: magnetic starters, QULON system accessories, etc.
Street Light Controller QULON C uses RS-485 or CAN interfaces for two-way communication with other devices and meters. 2G cellular communication is used to communicate with the QULON server.
The unit is powered from 110/220 V AC or 9-36 V DC.
The Street Light Controller QULON C is remotely configurable using the QULON control system and DIP switches on the unit.
The unit is designed for DIN rail mounting in a lighting control cabinet.
