Innovative Reduction of Street Lighting Energy

Wire Simpline Node is a wired PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.

Wire Simpline Node is compatible with third-party motion sensors.

Wire Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).

The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.

Wire Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).

The device is designed for installation in a luminaire, in a luminaire body or inside a lighting pole via wire. Dust and moisture protection class IP68.

Wire LiTouch Node is a module for wireless control of luminaires via radio. It is designed for individual control, diagnostics and dimming.

Individual control module for LiTouch wireless lighting management system (868/915 MHz) is a device that can be connected to the LiTouch system through a wire. It allows for individual control of the lighting system and is compatible with both 868 and 915 MHz frequency bands. With the LiTouch system, users can easily manage their lighting system wirelessly and without the need for additional wiring. The device is designed for easy installation and can be mounted in various locations.

The device supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces as well as individual load control (on/off). The units are equipped with GPS receiver, depending on the version.

Wire LiTouch Node is configured and controlled via an 800-950MHz radio channel via LiTouch Base Stations.

The device is designed to be installed in a lighting fixture housing using a wire.

Transform your city's street lighting infrastructure with the NEMA GSM Node, an ultra-compact and waterproof wireless controller. 

With its powerful functionality and diverse compatibility, it offers precise control and diagnostics for each luminaire.

The NEMA GSM Node leverages cutting-edge technology to optimize street lighting. 

Capable of managing luminaires up to 1000W within a broad voltage range (up to 305V), this device embodies efficiency and reliability. Motion sensor inputs permit integration with third-party sensors, augmenting its responsiveness to environmental cues. 

Whether controlling light, measuring tilt, or realigning based on GPS data, the NEMA GSM Node delivers with unparalleled accuracy.

NEMA Simpline Node is a module for individual control and diagnostics of luminaires and for dimming.

NEMA Simpline Node is a PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.

NEMA Simpline Node is compatible with third-party motion sensors.

NEMA Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).

The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.

NEMA Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).

The device is designed for installation on a luminaire via NEMA. Dust and moisture protection class IP66.

Wire GSM Node is a wireless 2G/4G/NB-IoT Wire street light controller for individual luminaire control, diagnostics and dimming.

The Wire GSM Node  supports the following luminaire control interfaces: DALI, DALI 2.0, PWM, 1-10V, 0-10V. Data exchange between the device and the server is performed via 2G/4G/NB-IoT cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.

The unit is powered from 110/220 V. The power of the luminaire is supported up to 1000 W.

The Wire GSM Node is configured directly via the QULON software.

The Wire GSM Node is designed to be mounted directly on the lighting pole or luminaire. The Wire GSM Node is IP66 dust and water resistant.  Installing via wire..

NEMA LiTouch Node is a module for wireless control of luminaires via radio. It is designed for individual control, diagnostics and dimming.

Individual control module for LiTouch wireless lighting management system (868/915 MHz) is a device that can be connected to the LiTouch system through a NEMA connector. It allows for individual control of the lighting system and is compatible with both 868 and 915 MHz frequency bands. With the LiTouch system, users can easily manage their lighting system wirelessly and without the need for additional wiring. The device is designed for easy installation and can be mounted in various locations.

The device supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces as well as individual load control (on/off). The units are equipped with GPS receiver, depending on the version.

NEMA LiTouch Node is configured and controlled via an 800-950MHz radio channel via LiTouch Base Stations.

The device is designed to be installed in a lighting fixture housing using a NEMA C136.41 connector.

Zhaga LiTouch Node is a module for wireless control of luminaires via radio. It is designed for individual control, diagnostics and dimming.

Individual control module for LiTouch wireless lighting management system (868/915 MHz) is a device that can be connected to the LiTouch system through a Zhaga connector. It allows for individual control of the lighting system and is compatible with both 868 and 915 MHz frequency bands. With the LiTouch system, users can easily manage their lighting system wirelessly and without the need for additional wiring. The device is designed for easy installation and can be mounted in various locations.

The device supports DALI 2.0 interfaces as well as individual load control (on/off). The units are equipped with GPS receiver, depending on the version.

Zhaga LiTouch Node is configured and controlled via an 800-950MHz radio channel via LiTouch Base Stations.

The device is designed to be installed in a lighting fixture housing using a Zhaga connector.

Screw Simpline Node is a PLC (Power Line Communication) control and dimming module for a luminaire or luminaire group.

Screw Simpline Node is compatible with third-party motion sensors.

Screw Simpline Node supports DALI, DALI 2.0, PWM, 1-10V, 0-10V interfaces and individual load control (on/off).

The unit is powered from 110-230 V. The power of the luminaire is supported up to 1000 W.

Screw Simpline Node is controlled individually by Central Gateway QULON C, C1 or C2 and QULON Simpline via 110-230 V power lines. Simpline technology uses the frequency range of 132.5 kHz according to CENELEC EN 50065-1 (band-C).

The device is designed for installation in a luminaire, in a luminaire body or inside a lighting pole via screw. Dust and moisture protection class IP68.

Zhaga GSM Node is a wireless 2G/4G/NB-IoT Zhaga street light controller for individual luminaire control, diagnostics and dimming.

The Zhaga GSM Node supports the following luminaire control interfaces: DALI 2.0. Data exchange between the device and the server is performed via 2G/4G/NB-IoT cellular networks. The luminaire can be controlled by a built-in light sensor, or by a third-party light sensor. The unit has a built-in GPS receiver for geo-positioning, internal clock correction and an internal accelerometer for vibration, acceleration and tilt measurements.

The unit is powered from 12-30 V DC.

The Zhaga GSM Node is configured directly via the QULON software.

The Zhaga GSM Node is designed to be mounted directly on the luminaire. The luminaire is IP66 dust and water resistant. Available with Zhaga connection.